EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is usually a extremely efficient photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technologies, it guarantees optimized Electrical power conversion and technique steadiness for a variety of photovoltaic (PV) purposes.
Key Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for remarkable photo voltaic Electrical power harvesting. Key features consist of:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Highly developed MPPT Algorithm with >ninety nine% efficiency.
Dual-Phase Charging for Improved battery life.
LCD Exhibit with actual-time knowledge checking.
Several Load Control Modes including handbook and timer.
In depth Electronic Protections from overcharging, about-discharging, small circuits, and reverse polarity.
Step-by-Move Guidebook to Starting the EPEVER Tracer AN Series Controller
one. Unboxing and Preparing the Controller
Guarantee all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Verify the model selection and voltage ratings match your solar panel and battery specifications.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry site near to the battery bank.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Sustain appropriate clearance for heat dissipation.
three. Wiring the Solar Charge Controller
Warning: Generally observe proper security protocols and make sure the procedure is driven off just before connecting components.
Move one: Link the battery terminals to the demand controller (constructive to good, negative to detrimental).
Phase 2: Join the photo voltaic panel array for the PV enter terminals.
Action 3: Join the load terminals if utilizing a immediate load link.
Phase 4: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Configurations
Power to the controller by connecting the battery very first.
Use the Liquid crystal display Exhibit to navigate the options menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Command.
five. Checking and Facts Logging
The Tracer AN Read more Series supports serious-time monitoring utilizing the MT50 remote meter.
Facts might be logged by way of the RS485 interaction port working with application including Photo voltaic Station Personal computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Difficulties
Problem one: No Electrical power Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Defense
Verify the photo voltaic array’s voltage score.
Adjust procedure parameters if essential.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options during the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology assures:
Bigger Effectiveness: Minimized Power losses all through conversion.
Enhanced Dependability: Secure efficiency underneath variable loads.
For a longer time Battery Daily life: Dependable and accurate charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is an Extraordinary option for optimizing solar power technology and extending battery existence. By next the above setup tutorial, users can be certain greatest performance and program longevity.